Notched Bar Film Applicator, 4-side

This 4-side notched bar film applicator is used to coat a uniform film electrode on a flat substrate. There are 4 choices of thickness for each notched bar. It is made of high-quality stainless steel. The length of the bar is 100mm which is able to cast a film with a width of 80mm.

Specifications

• #1: (5μm,10μm,15μm,20μm)    
• #2: (25μm,50μm,75μm,100μm)  
• #3: (50μm,100μm,150μm,200μm)
• #4: (30μm,60μm,90μm,120μm)     
• #5: (100μm, 200μm,300μm,400μm)   
• #6: (50μm, 75μm,100μm,150μm)
• #7: (100μm, 150μm,200μm,250μm) 
• #8: (250μm, 500μm,750μm,1000μm)

For lithium battery lab research, No.7 with a thickness of 150um or 250um is strongly suggested.

Go back to Storefront